Slipspace

Is coming.

Sub-minute E2E PCB Compiler

The jumpCompiled, placed, routed and checked in 13.3 seconds.

00.00 secCompile
SD temperature logger58 × 44 mm · 27 parts

Real time, end to end: the coordinates in, a board that passes KiCad’s check out.

6 blocks compiled

Timed on 18 Nov 2026 through the MCP compile tool, the median of three runs, on a laptop with other work running. In the external benchmark run earlier that day1 the same coordinates built in 9.2 s. The phases and the clock are the build’s; inside a phase, the order things are drawn is ours. The copper is this build’s, track for track.

CoordinatesFour functions became 27 parts in half a millisecond.

The coordinates, as Haiku wrote them

{
  "functions": [
    {"sense": "temperature"},
    {"store": "microsd"},
    {"control": "mcu", "wireless": "wifi"},
    {"indicate": "status_led"}
  ],
  "power":  [{"source": "usb-c"}],
  "prefer": {"mcu": "esp32-wroom"}
}
  1. 01

    Coordinates

    What the device must do, how it is powered, what you prefer. A model writes them from one sentence.

  2. 02

    Forge

    Six blocks match: a TMP117 sensor, microSD, a status LED, a USB-C sink, an ESP32-WROOM and a buck. Each was built and checked alone before it joined.

  3. 03

    Synthesis

    Pins, rails and parts are chosen by search, with no model. The 3.3 V rail draws 0.601 A, past the 0.6 A that Forge’s linear regulator gives, so it chose the AP63203 buck.

  4. 04

    The build

    Placed, routed, poured and checked like any other board. This one passes with 0 KiCad errors.

The ultimate visionBoards now. Devices next. Then whole machines.

  1. Leg 01In transit

    Coordinates to board

    A sentence becomes coordinates. Coordinates become a board that passes KiCad’s check, in seconds, with no wire drawn by hand.

    13.3 sec, coordinates to board · 18 Nov 2026

  2. Leg 02In transit

    A library that learns

    Every block is built alone and checked before it joins Forge. Write a block for something it lacks, and it is built, admitted and ready for the next board.

    92 blocks · 18 Nov 2026

  3. Leg 03Charted

    Board to device

    The same coordinates carry the case, the firmware and the parts order. One request, a verdict at every stage, a device in your hand.

  4. Leg 04Horizon

    Device to machine

    Then whole machines. A robot is boards, cases, code and a supply chain that have to agree. The goal is to compile all of it, from intent to the production line.

Where it standsUnder a millisecond to compile. Under 15 seconds to build.

Compile

0.6 ms

coordinates to a whole design, the median on three external prompts.1 No model in the loop.

18 Nov 2026

Build

14.9 s

the slowest of eight Slipspace builds on the external prompts,1 coordinates to a saved board. The fastest took 4.9 s.

18 Nov 2026

Sentence to board

28.2 s

for an SD-card temperature logger that passes with 0 KiCad errors, the model’s turn included.

18 Nov 2026

External prompts

7 / 9

boards came from Slipspace. All nine pass with 0 KiCad errors.1

18 Nov 2026

Today it runs behind a flag. On prompts it has never seen, most still ask for a block Forge lacks, so growing Forge is the work before launch.

  1. 1 The external prompts are siliXon’s three published prompts, from their post of 10 Nov 2026, run on soldermask by Haiku 5.5, three times each, on 18 Nov 2026. The head-to-head card has every run.

Set thecoordinates.

Get early access

01 / 02

Request access

The alpha is private. Leave an address and an invite is sent by hand.

The code is in a private repository. With a username, you are added to it.